. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quitting
Complete these steps when you have completed your work with the DCS 465 Camera Back and the Macintosh computer.
NOTE: As mentioned at the start of this chapter, the settings you choose while in the driver image window are maintained, and will be in effect the next time you enter the driver image window.
1.(Optional) Choose KODAK DCS 465 again from the ACQUIRE submenu to return to the driver image window; copy/move images to the Macintosh hard disk, and delete unwanted images. Deleting images will make room on the PCMCIA card for additional images.
2.Acquire additional images or choose CANCEL to leave the driver image window.
3.Save opened Photoshop acquired images as desired.
IMPORTANT: Recall as described earlier in this chapter that if you have not made any changes to an acquired image while in Photoshop, and you quit Photoshop, the window will close without asking you if you want to save it. Therefore, be sure you use one of the SAVE commands from the FILE menu to save any acquired images you do not want to lose before quitting Photoshop.
4.Choose QUIT from the Photoshop FILE menu.
5.Choose SHUT DOWN from the Macintosh SPECIAL menu.
6.Turn off other SCSI devices if present.
7.(Optional) Disconnect the AC battery charger/adapter if it is con- nected.
8.(Optional) Disconnect the DCS 465 Camera Back from the computer.
