Kodak DCS 465 Reference KODAK Driver for Adobe Photoshop (Macintosh) Software 10-39

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-39

The SCSI cable is not

connected properly. Verify that the SCSI cable is

connected properly between the

computer and the DCS 465

Camera Back. If not, turn the

computer off and disconnect the

AC adapter, reconnect the cable,

and try again.

The DCS 465 Camera

Back SCSI ID is set

improperly.

Reset the DCS 465 Camera Back

SCSI ID so that it is different from

other devices connected to the

computer. To do so, turn off the

computer then other SCSI

devices. Reset the DCS 465

Camera Back SCSI ID. Restart.

(If your Macintosh computer has

a CD-ROM drive, be certain that

you avoid its number — often

number 3.)

“The camera back was

not found. Try the

following.

Check all cables

Check for SCSI ID

conflict

Check for a dead

battery.

Switch to an archive

folder.”

Message Possible Cause Suggested Solution