. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“File Error: Cannot find | The TWAIN compliant |
WINASPI.DLL.” | KODAK Driver for ASPI |
| is installed, but a Future |
| Domain SCSI Host |
| Adapter and not an ASPI |
| compliant host adapter is |
| installed in the computer. |
Reinstall the driver, following the directions in chapter 5, and install and select the TWAIN compliant KODAK Driver for Future Domain but not the TWAIN compliant KODAK Driver for ASPI.
Obtain an ASPI compliant host adapter, have a technician install it, and then try again.
The TWAIN compliant KODAK Driver for ASPI is installed, as is an ASPI compliant host adapter, but the Windows ASPI files that accompany the ASPI compliant host adapter are not installed.
Install the Windows ASPI files that accompany the ASPI compliant SCSI host adapter, then try again.
If for some reason the Windows ASPI files were not supplied with your host adapter, contact the source of the host adapter to inquire about obtaining them.
Even though you may have installed ASPI files for other operating platforms (for example for DOS), the Windows ASPI files must be installed to use the KODAK Driver.
“Firmware file for the | A problem occurred | Reinstall the TWAIN driver and |
camera is invalid.” | when downloading | try again to download camera |
| camera back firmware. | back firmware. If the problem |
|
| continues, and there are no other |
|
| messages that provide help in |
|
| this situation, contact Kodak. |
