. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-2 Using the DCS 465 Camera Back
Readying the DCS 465 Camera Back
1. If the DCS 465 Camera Back is not connected to your camera, connect
it now as described in chapters 4 (Macintosh) or 5 (PC).
2. If a formatted PCMCIA card is not in the camera back, insert one now.
NOTE: Refer to chapters 4 (Macintosh) or 5 (PC) for information on formatting,
inserting, and removing PCMCIA cards. If the camera back LCD shows “E6”
the card has not been formatted; you must format it before you can continue.
ISO SCSI ID
CARD BUSY
LCD