. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The time and date are maintained by the battery in the DCS 465 Camera Back. You update the date and time with the SET CLOCK choice described later in this chapter.
You can enter short descriptive material in the text box. Type the material and then use the mouse or arrow keys to move through text once entered. The text will be saved with the image (on the PCMCIA card), and will be saved with the image if it is moved or copied to an archive folder. The box can hold a maximum of 250 characters.
The text is not obtained when the image is acquired into your TWAIN- compliant PC application. However, you can copy or cut text from the text box for the image, and after acquiring the image, you may be able to paste the text onto the image if supported by the application.
NOTE: If your computer monitor provides a software switch that allows you to center dialog boxes, you may wish to turn this feature off so that an information box does not cover images on the screen.
You will not be able to take pictures while the Info box is opened for an image; close the box and then take the picture.
SOURCE
Allows you to work with images from the DCS 465 Camera Back (choose CAMERA from the popup menu), and from all archive files in a folder on the PC hard disk or on a PCMCIA card in a drive connected to your PC (choose FOLDER from the SOURCE menu). When working with a folder, the folder name appears at the top of the driver image window.
When you open the driver, the software looks first to the source in use at the end of your previous work session. If that source is not available (for example if you were using archive files and you have deleted or renamed the folder you were using), the software will look for the other SOURCE.
Reference — KODAK Drivers for
