. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.Wipe off residue on the filter glass by wiping repeatedly straight across the glass with a dry corner of the cleaning pad.
7.Carefully lift the filter glass by its edge, and examine it in the light to determine if it has been cleaned successfully.
8.If it is still dirty, repeat steps 2 through 7.
9.Use canned air to blow dust off the imager.
10.If there is still lint on the filter glass, repeat step 9.
Replacing the Filter Glass and Frame
1.Carefully place the KG5 filter glass in the camera back; both sides are the same, either side can be facing up.
2.Position the filter glass frame on the camera back.
3.Replace the four screws that hold the frame in place.
4.Remove the ESD wrist strap from the camera back and from your wrist.
The camera back is now ready for use.
