Kodak DCS 465 user manual Scsi Port Pin Connector Pin Terminator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.Attach the supplied 25-pin terminator to the other end of the SCSI cable and then to the DCS 465 Camera Back.

SCSI Port

25-pin Connector

25-pin Terminator

8.(Optional) Later, to disconnect the camera back from the PC, turn off the computer and all external SCSI devices. Then restore the SCSI cables and terminator to the state they were in before the camera back was connected. Do not leave a SCSI cable with an empty connector dangling from a SCSI chain.

Skip the next section and continue at “KODAK Drivers for TWAIN-

Compliant PC Applications” later in this chapter.

 Preparing for Use with PC G 5-25