. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-27
5. Connect the 50-pin connector to the empty SCSI connector of the
device that is terminated internally. Make sure the connector is well
seated by pressing it into place firmly, and then pinch the thin wire
clamps over its base.
25-pin Connector
50-pin Connector
BACK OF PC
Not
Terminated Terminated
Internally
BACK OF ONE OR MORE
SCSI DEVICES
6. Attach the other end of the SCSI cable to the SCSI connector on the
DCS 465 Camera Back.
25-pin Connector
SCSI Port