NEC LT75Z user manual Wiring Diagram, VCR, DVD Player or, Macintosh, IBM VGA or Compatibles

Wiring Diagram

RGB Signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied cable.

VCR, DVD Player or

LaserDisc Player To video, S-video, and audio inputs on the projector.

Macintosh

(Desktop type or notebook type)

PC CONTROL AUDIO VIDEO S-VIDEO RGB

IBM VGA or Compatibles

(Desktop type or notebook type)

Document Camera	Component V cable RCA×3 (not supplied)
	and Optional 15-pin-to-RCA (female)×3 cable
	(ADP-CV1)

DVD Player

(with component output)

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

NOTE:

*If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.

NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection.

NOTE: Audio signal is not available for this connection.

Video equipment such as DVD player

Projector

ADP-SC1

Commercially available SCART cable Female

1.Turn off the power to the projector and your video equip- ment.

2.Use the NEC ADP-SC1 SCART adapter and a commer- cially available SCART cable to connect the RGB input of your projector and a SCART output (RGB) of your video equipment.

3.Turn on the power to the projector and your video equip- ment.

4.Use the RGB button on the remote control to select the RGB input.

5.Press the MENU button on the remote control to display the menu.

6.From the Advanced menu, select [Projector Options] →

[Setup] → [Signal Select RGB] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connec- tor.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe.

Contact your NEC dealer in Europe for more information.

E-16