E-13
Remote Control Battery Installation
1.Push to open the batter y cover.
2.Remove both old batteries and install new ones (AA). En-
sure that you have the batteries’ polarity (+/–) aligned cor-
rectly.
3.Put the batter y cover back on.
Do not mix different types of batteries or new and old bat-
teries.
30˚
7m
7m
30˚
30˚
30˚
Operating Range
The infrared signal operates by line-of-sight up to a distance
of approximately 22 feet (7m) and within a 60-degree angle of
the remote sensor. The projector will not function if there are
objects between the remote control and the remote sensor on
the projector or if strong light falls on the remote sensor. A
weak battery will also prevent the projector from operating prop-
erly.
This sample may be slightly different from actual range
Remote Control Precautions
•Handle the remote control carefully.
•If the remote control gets wet, wipe it dry immediately.
•Avoid excessive heat and humidity.
•Do not place the battery upside down.
•If you will not be using the remote control for a long time,
remove the batteries.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recom-
mended by the manufacturer.
Dispose of used batteries according to your local regu-
lations.