. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Commands

The driver provides a variety of features that allow you to work with image and sound files on the DCS 465 Camera Back PCMCIA card and on the PC hard disk. The driver allows you to return from a photographic shoot, rapidly view the images, and transfer selected images to the PC hard disk for archival purposes or for later retrieval into your TWAIN- compliant application. You can then delete some or all of the images on the camera back PCMCIA card in preparation for making additional images. Sound files can be played through the driver (if supported by your PC) and saved to your PC hard disk with their corresponding image. These features are briefly described in this chapter.

To use these features, you must first install the driver by following the series of onetime steps described in chapter 5. Then each time you want to use the driver, you run your TWAIN-compliant application and access the driver as described in chapter 8. When you do, you will see the following driver image window on your PC monitor.

As you work with the driver, the settings you choose are automatically maintained from session to session.

NOTES: If you are using a camera back without a PCMCIA card, and there is an image in the camera back, you will only see that single image in the driver image window. As each new image is made, it replaces the single image in the camera back and in this window.

You choose a command by clicking it with the mouse. Or you can use a key- board shortcut; to do so, press and hold the Alt key, press the key for the under- lined letter in the command (for example the “L” in Last Image), then release both keys.

11-4  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G

Page 310
Image 310
Kodak DCS 465 user manual Commands