. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“No ASPI managers for | A problem has occurred |
Windows were found.” | with your software ASPI |
| manager for Windows. |
Install, or reinstall, the ASPI manager for Windows. This software, which is not available from Kodak, should be provided with your ASPI Windows host adapter card.
“No images were | You have clicked on | No action needed. |
recovered from the disk.” | Recover Disk in the |
|
| Control Panel but there |
|
| were no images to |
|
| recover. |
|
“Not enough disk space.” There is not enough room on the disk to save the file.
Choose another disk, and try again.
“Not enough memory.” | There is not enough |
| memory to complete the |
| operation. |
Be certain that you have the minimum system requirements (refer to chapter 1). Shut down other applications if they are running.
“One of the colors is saturated. Please pick another point for balancing.”
After choosing Click from the Balance menu you have clicked on an overexposed area of the image.
Choose Click again from the Balance popup menu and then click a white area that is not overexposed. (Refer to the explanation of Click on page
“Parity error detected | A hardware error has |
during transfer.” | been detected in the |
| cabling or in the camera |
| back. |
Verify that all SCSI connections are correct (if necessary turn off all equipment to alter the connections). Try other cables if available. If the problem persists, contact Kodak.
“Self Test has completed | The self test is done. | No action needed. |
successfully.” |
|
|
