. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter. Although this step is optional, we recommend it whenever the camera back is connected to a computer.

4.When you have completed part A or part B of this step, the last device in the chain should have a cable (with no terminator) connected to one of its SCSI ports, and the other port should be empty.

BACK OF PC

BACK OF ONE OR MORE

NON-INTERNALLY TERMINATED

SCSI DEVICES

Empty SCSI Port

A.If there is an external SCSI terminator on an otherwise empty SCSI port on the last device, remove it.

B.If there is an external SCSI terminator between the end of a cable and a SCSI port on a device, remove the terminator. Reconnect the cable. (Later, if you remove the DCS 465 Camera Back cable from your PC, remember to replace this terminator.)

 Preparing for Use with PC G 5-23

Page 123
Image 123
Kodak DCS 465 user manual Empty Scsi Port