Kodak DCS 465 user manual Cable release Screws into end of CTM

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.Mechanically tripped camera.

CAUTION: To simplify making these connections, each cable has unique connectors at both ends. Cables can only be plugged into one connector. Therefore, do not force the end of any cable into any connec- tor; instead, all cables should fit comfortably into their connectors.

Camera sync cable

(Plug this end into the

body or lens.)

4-pin

3-pin

5-pin

Optional:

Connect

flash sync cable here.

Mechanical

camera trigger module (CTM)

(Screw this end into camera body.)

Cable release

(Screws into end of CTM)

NOTE: Your cable release (not supplied) must have a “throw” of at least 5/8-inch in order to extend far enough into the CTM to trip the camera. The throw is the distance the pin extends from the end of a cable release when you fully depress the cable release button.

 Preparing for Use with Mac G 4-5