. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Cannot Take Picture at | You have clicked Take |
this time. Battery is low.” | Picture while connected |
| to an electrically tripped |
| camera, but the battery |
| is low. |
If you are operating while the AC battery charger/adapter is connected, wait for a short time and try again.
If you are operating without the AC adapter but are in an environment where power is available, attach the adapter, wait for a short time and try again.
If neither a power source nor an adapter is available, you will not be able to complete this operation.
We encourage you to charge the battery for at least one hour before any field operations. A charged battery provides approximately 100 images.
“Cannot Take Picture at this time. Camera is off.”
The camera back is busy.
The camera can not be electrically tripped.”
You have tried a command (for example Copy to Folder), and the DCS 465 Camera Back is still performing another operation.
Wait for a short time (for example wait until the red Card Busy light on the camera back stops blinking), and then try again.
Mechanically tripped | Take pictures using your cable |
cameras can not be | release. |
tripped with the Take |
|
Picture button. |
|
