Kodak DCS 465 user manual 24  Preparing for Use with PC G

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end.

IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back; do not use a substitute cable.

50-pin Connector 25-pin Connector

6.Connect the 50-pin connector to the empty connector on the last SCSI device in the chain. Make sure the connector is well seated by press- ing it into place firmly, and then pinch the thin wire clamps over its base.

25-pin Connector

50-pin Connector

5-24  Preparing for Use with PC G