. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.Wake (see illustration below) the DCS 465 Camera Back using one or the other of these two methods.
A.Operate while connected to the AC battery charger/adapter; the camera back is continually awake in this state.
B.When not connected to the adapter, wake the camera back by lightly pressing the record button; with an electrically tripped camera you can also quickly tap the shutter release cable button. (The camera back sleeps after several seconds of inactivity; as you complete these steps reawaken the camera back as needed.)
Camera back is asleep | Typical awake indication |
Record button
LCD
ISO | SCSI ID |
CARD BUSY
