. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Could not acquire this | You have tried to |
image because | acquire a blank image, |
informational data was | or an image that has |
invalid.” | been corrupted. |
Blank images cannot be acquired. Work with another image.
If it is not a blank image, you may not be able to acquire this image.
“Could not load calibration file (465- nnn.cal) for this image.”
The driver does not find the calibration file for the camera back used to take this image
You will not be able to display the thumbnail or preview for this image, nor will you be able to acquire this image, unless you have the calibration file for the camera back used to take this image. Obtain that file and place it in the same location on your hard disk as the driver
“Could not play sound | The sound file may be |
file.” | corrupt. |
If possible, record the sound again and repeat this operation.
“Could not save any images. All images had bad informational data.”
You have tried to save a blank image to an archive folder, or an image that has been corrupted.
Blank images cannot be saved to archive folder. Work with another image.
If it is not a blank image, you may not be able to acquire this image.
“Could not save because the disk is full. Approximately XXXX kilobytes disk space needed to save all images.”
You are trying to save a file that is larger than the available space on the selected disk.
Select another disk if available, or delete files from the disk and try again. The message indicates the total kilobytes needed to save the file.
