. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
continued from previous page
“The camera back was not found. Try the following.
Check all cables |
Check for SCSI ID |
conflict |
Check for a dead |
battery. |
You have connected the DCS 465 Camera back to a different computer (or to the same computer to which you previously connected an additional SCSI device), resulting in a SCSI ID conflict.
Reset the DCS 465 Camera Back SCSI ID so that it is different from other devices connected to the computer. To do so, turn off the computer. Set the DCS 465 Camera Back SCSI ID to a unique value. Restart.
Switch to an archive |
folder.” |
The battery in the | Operate from the AC battery |
camera back is dead. | charger/adapter or charge the |
| battery from the adapter and try |
| again. |
You have deliberately chosen the driver when no camera was connected with the intention of working with images in an archive folder.
Click “Switch to Folder” and open an archive folder from your computer hard disk.
“The camera back was | Same as previous | Same as the previous message; |
not found. Try the | message. | however, this message does not |
following. |
| present the option of switching to |
Check all cables |
| an archive folder. |
Check for SCSI ID |
|
|
conflict |
|
|
Check for a dead |
|
|
battery. |
|
|
