. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“A new version of the driver is needed to use this image.”
The driver you are using is outdated and will not work with the current version of the DCS 465 Camera Back.
Install a new driver and try again. Refer to Appendix A for additional information.
“A SCSI Error occurred. | There may be one of a | Shut down the computer and |
Please turn camera back | variety of problems, | disconnect the camera back from |
off and then on again or | including loose or | the computer and the AC battery |
check your external | incorrect cables, | charger/adapter. Check all SCSI |
drive.” | improper SCSI | connections, cables, and |
| configuration, and so | termination. Reconnect your |
| on. | equipment, restart, and try again. |
“Bad Informational data has been found. Continue and save the rest of the images?”
You are trying to copy or move image(s) to an archive folder and one or more of the images is a blank image.
Click OK to copy or move all selected
“Calibration file (465- | The driver does not find |
nnnn.cal) is missing.” | the calibration file for |
| the camera back used to |
| take this image |
You will not be able to display the thumbnail or preview for this image, nor will you be able to acquire this image, unless you have the calibration file for the camera back used to take this image. Obtain that file and place it in the same location on your hard disk as the driver
