. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.Hold the camera back so that light reflects off the imager; visually inspect the imager for grease, fingerprints, lint, or other dirt.
12.If the imager is clean, continue at “Cleaning the Filter Glass;” how- ever, if the imager is dirty, clean it using the following steps.
Cleaning a Dirty Imager
Wiping the Imager
1.Examine the imager visually. If there is lint on the imager (but not grease, fingerprints, or other dirt), avoid touching the imager and continue at step 9; otherwise continue with the next step.
2.Dampen one corner of the web cleaning pad sparingly with the cleaning solution.
3.Wrap the damp corner of the cleaner pad over the forefinger of one hand.
4.Hold the camera back firmly in place on the flat surface with your other hand.
