Kodak DCS 465 user manual 20  Preparing for Use with PC G

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.Attach the 50-pin SCSI2 connector to the SCSI2 port on the back of the PC. Make sure the cable connector is well seated by pressing it into place firmly, so that the spring-clips on the connector snap onto the SCSI port.

6.Attach the appropriate end of the supplied 25-pin SCSI terminator to the open 25-pin end of the SCSI cable you just attached to your PC.

BACK OF PC

25-pin Terminator

5-20  Preparing for Use with PC G