Kodak user manual DCS 465 Camera Back Used with Other Scsi Devices

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.Attach the other end of the cable (25-pin SCSI connector) to the SCSI port on the DCS 465 Camera Back.

SCSI Port

8.(Optional) Later, to disconnect the camera back from the PC, shut down the PC. Then disconnect the terminator from the camera back. Disconnect the SCSI cable from the PC. Do not leave a SCSI cable with an empty connector dangling from your PC.

Skip the next section and continue at “KODAK Drivers for TWAIN-

Compliant PC Applications” later in this chapter.

DCS 465 Camera Back Used with Other SCSI Devices

NOTE: If other external SCSI devices are connected to your computer, you may need to obtain a SCSI terminator to complete these steps.

Follow these steps if one or more external SCSI devices are already connected to your PC; otherwise, continue at the next section of this manual entitled “KODAK Drivers for TWAIN-Compliant PC Applications” later in this chapter.

 Preparing for Use with PC G 5-21