. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing The Calibration (CAL) File
Follow these steps to install the calibration file for use with the DCS 465 Camera Back.
1.Start Microsoft Windows and make sure that you are in the Program Manager.
2.Insert the diskette labeled “KODAK Professional DCS 465 Digital Camera Back System Calibration File TWAIN (PC) Format” into your floppy drive.
IMPORTANT: Make a backup of this diskette; you cannot move images into your TWAIN application without the CAL file.
3.Open the README file for the installation process by following these steps:
A.Choose RUN from the FILE menu.
B.Type A:\README.TXT (type B:\README.TXT if the diskette is in drive B) in the command line.
C.Click OK; the file opens.
D.After reading the file, choose EXIT from the FILE menu; you are returned to the Program Manager.
4.Continue the installation process by following these steps:
A.Choose RUN from the FILE menu.
B.Type A:\SETUP (type B:\SETUP if the diskette is in drive B) in the command line.
C.Click OK.
D.Wait as the initial screen and then the welcome screen appear.
E.Read the welcome screen and then click CONTINUE.
