Casio V-R7000, V-R7100 +

Connecting the Power Supply and Various Devices

E-29

Installation

• The display may be wall-mounted. In this

case, the stand is not used.

For further details, contact the CASIO service representative.

MCR Unit (VA-B46MCRE) Installation

+Before installation, be sure to turn the ma in power switch OFF and remove the plug fro m

the power outlet.

(1) Remove the MCR unit cover with a

Phillips screwdriver etc. and connect

the MCR unit connector.

(2) Install the MCR unit as shown in the

illustration and secure it with 2 screws

(supplied).

+During installation, take care not to tr ap the connected cable betwe en the MCR unit and

the display.

For how to install a printer or other optional device, refer to the Operating Instructions

supplied with the optional device.

Screw holes for wall-mounting

Contents

Main Page Contents Basic Operation ..............................................E-11 Installation...................................................E-19 Safety Precautions * - $ Do not use the product in abnormal condition - * Installation location Page E-5 Regulatory Information FCC WARNING: The USA and Canada WARNING: E-6 Caution: E-7 Europe Precautions for Use Installation Location Dead Pixels 802.11a/n Restrictions Other Take Advance Notice of the Following Trademark Registration Page Basic Operation Name of Parts and What They Do <Front> Name of Parts and What They Do <Rear> Name of Parts and What They Do <Left side (when the side cover is opened)> Power ON/OFF Moving and Cleaning 1. 2. + 3. 4. Description of the Indicator The status is indicated by the ON, ashing, or OFF of the indicator. Adjusting the Angle of the Display 1. + When the Drawer Does not Open (if using the optional CASIO drawer) + Installation Name of Parts and What They Do <Left side on the back of the display> Page Connecting the Power Supply and Various Devices + POINT Order of Connection Connecting the Drawer cable 1. 2. Connecting Other Devices Connecting the Printer Cable Insert the SD Card Connecting the HDMI Device + Preparing the Stand 1. A 2. + 3. A Setting the Stand and the Display 1. + 3. Page 8. 9. Installation features MCR Unit (VA-B46MCRE) Installation + Specication Specication