
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble | Possible Cause | Suggested Solution |
|
|
|
The battery has become exhausted while the camera back is connected to the PC; the AC battery charger/adapter is not being used.
When the camera back is connected to a PC, and the software driver window is opened, the camera back will not go to sleep. This can exhaust the battery if it continues for an extremely long period of time (perhaps a month or more) without recharging.
Recharge the battery in the camera back.
We recommend that you operate the camera back from the AC battery charger/adapter when connected to a PC.
You clicked the Take Picture button, but no picture was recorded.
The PCMCIA card in camera back is full (the disk indicator is flashing).
Delete images from the PCMCIA card, or use a different card if available.
You clicked the camera shutter but no picture was recorded
While connected to a computer with the driver running, an Info box for an image is opened.
Close the Info box and try again.
Reference — KODAK Drivers for