Kodak DCS 465 user manual Example 4 Micrografx Picture Publisher 4.0

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Example 4: Micrografx Picture Publisher 4.0 and 5.0

Once you have installed the TWAIN driver(s) as described earlier in this chapter, and are in Windows, you access the driver by following these steps.

1.Run Micrografx Picture Publisher.

2.Choose SCANNER on the SETUP submenu on the Micrografx Picture Publisher FILE menu; the SETUP SCANNER dialog box appears.

3.Click TWAIN (version 4.0) or SELECT SOURCE (version 5.0); you see the SELECT SOURCE dialog box.

4.Click “DCSXXX,FUTUREDOMAIN” or “DCSxxx,ASPI” depending on which version of the TWAIN driver you installed and want to use. Laptop users should click the ASPI driver.

5.Click SELECT; you are returned to the SETUP SCANNER dialog box.

6.Click OK; you are returned to Picture Publisher.

NOTE: The choice of source, and other settings you establish while using the driver, are maintained in a preferences file for the TWAIN-compliant driver; you do not need to repeat steps 2 through 6 each time you use the driver.

7.Choose ACQUIRE on the FILE menu.

8.Wait as the driver image window appears, then continue at “Updating Firmware in the DCS 465 Camera Back.” That section begins by showing the driver image window.

5-46  Preparing for Use with PC G