. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“The Battery in the | The battery needs | If you are operating without the |
Camera is almost | charging. | AC adapter but are in an |
exhausted. Please connect |
| environment where power is |
the AC Adapter.” |
| available, attach the adapter, |
|
| wait for a short time and try |
|
| again. |
|
| If neither a power source nor an |
|
| adapter is available, you will not |
|
| be able to complete this |
|
| operation. |
|
| We encourage you to charge the |
|
| battery before any field |
|
| operations. The Specifications |
|
| appendix provides the number of |
|
| images you can expect from a |
|
| fully charged battery. |
“The camera is busy. Please try command again later.”
You have tried a command (for example Copy to Folder), and the camera back is still performing another operation.
Wait for a short time (for example wait until the red Card Busy light on the camera back stops blinking), and then try again.
Reference — KODAK Drivers for
