. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-2 Repacking Instructions
3. Remove the DCS 465 Camera Back from your camera.
4. Cover the imager on the camera back with the imager cover.
5. Insert the DCS 465 Camera Back into the static shielding bag and seal
the bag with tape.
6. Place all other major system components (see above) into their
appropriate locations within the original shipping carton.
7. Place the completed Problem Report Form (Appendix C) on the top of
(inside) the shipping carton.
8. Close and seal the shipping carton with tape.
9. Ship as instructed by your Kodak representative.