. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If you are unable to open the driver (and therefore cannot access the Control Panel containing the button), hold down the Control key on your keyboard while accessing the driver from your application. This will bypass the normal access to the driver and will place you directly in the Control Panel from which you can click on the UPDATE CAMERA FIRMWARE button.
If you are working with a camera back that does not cur- rently have a PCMCIA card installed, updating camera back firmware deletes the image in the camera back DRAM if one is present.
After clicking this button, if you see a message asking you to use the AC battery charger/adapter and to wait for several minutes, follow these instructions and wait (to allow the battery to charge) before clicking this button again.
Displays the version of the firmware (control program- ming) in the camera back currently attached to the com- puter.
NOTE: This firmware version may be different from the firmware version displayed in an information box for an individual image. The version in the control panel is the version of the camera back currently connected to the computer. If a camera back with different firmware was used to produce an image, then a different firmware version will appear in the information box for that image.
DRIVER VERSION Displays the version of the software driver currently in use.
DO SELF TEST Click this button to perform a diagnostic
