Kodak DCS 465 user manual Continue at the next section

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.Attach the other end of the SCSI cable to the SCSI connector on the DCS 465 Camera Back.

SCSI Connector

25-pin Connector

7.(Optional) Later, to disconnect the camera back from the Macintosh computer, shut down the computer and all external SCSI devices. Then restore the SCSI cables and terminator to the state they were in before the camera back was connected. Do not leave a SCSI cable with an empty connector dangling from a SCSI chain.

Continue at the next section.

4-32  Preparing for Use with Mac G