. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Downloading a Driver from CompuServe

This section assumes that you have an account on CompuServe and that you are familiar with procedures to initiate and terminate a session on this network. If you need information on any of these topics, contact CompuServe at the address provided above.

There are a large number of communications software packages that you can use to access CompuServe. The instructions below assume that you are using either the Macintosh or Windows (PC) version of the software application “CompuServe Information Manager.” If you are not currently using CompuServe and want to do so, you may wish to obtain and use this low-cost application which is widely available. If you are using another software product to access CompuServe, review the steps below; they provide information on the name and location of the file(s) you will need to download.

NOTES: The steps below were prepared using CompuServe Information Manager, Macintosh version 2.1.2 and Windows version 1.0.4. The screens were generated from the Macintosh computer version; similar screens appear on the PC.

1.Initiate a computer work session and run CompuServe Information Manager.

2.Follow these steps to enter the KODAK FORUM. (It may have a different name, for example KODAK CD FORUM.)

A.Choose GO from the SERVICES menu.

B.Type KODAK in the text box.

 Updating Your Kodak Software Driver G A-3

Page 355
Image 355
Kodak DCS 465 user manual Downloading a Driver from CompuServe