. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making the SCSI Connection
The DCS 465 Camera Back is a
Continue below at “DCS 465 Camera Back as the Sole SCSI Device” (this page), at “DCS 465 Camera Back Used with Other SCSI Devices,” or at “DCS 465 Camera Back Used with a Laptop” as appropriate to match your intended configuration.
DCS 465 Camera Back as the Sole SCSI Device
1.Turn off the PC.
IMPORTANT: Later when you connect and disconnect the PC and the DCS 465 Camera Back, make sure that the PC is off.
2.Place the DCS 465 Camera Back in a convenient position next to your PC.
3.Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter. Although this step is optional, we recommend it whenever the camera back is connected to a computer.
4.Select the SCSI cable with the
IMPORTANT: use only the cable supplied with the camera back; do not use a substitute cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preparing for Use with PC G
