. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the DCS 465 Camera Back to Your Computer
Follow the steps in this section to connect the DCS 465 Camera Back to your camera.
CAUTION: As you complete these steps handle the camera back — and especially the imager – with extreme caution. A damaged imager can result in a very expensive repair not covered by the warranty.
1.Remove the imager cover from the camera back by inserting a thumb beneath a corner of the cover and separating it from the camera back.
IMPORTANT: Retain the imager cover and immediately replace it at any time that you remove the camera back from your camera.
CAMERA BACK
IMAGER COVER
KG5 filter glass
Imager (beneath the KG5 filter glass)
Preparing for Use with PC G
