. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“ASPI for Windows does | The ASPI manager does | Run Windows in Enhanced |
not support this mode.” | not support the current | mode. |
| mode setting. This error |
|
| may occur when |
|
| Windows is running in |
|
| Real Mode. |
|
“ASPI for Windows has | A problem has occurred |
not been initialized.” | with your software ASPI |
| manager for Windows. |
Install, or reinstall, the ASPI manager for Windows. This software, which is not available from Kodak, should be provided with your ASPI Windows host adapter card.
“Calibration file (...) is | The driver does not find |
missing.” | the calibration file for the |
| camera back used to take |
| this image. |
You will not be able to display the thumbnail or preview for this image, nor will you be able to acquire this image, unless you have the calibration file for the camera back used to take this image. Reinstall it using the “KODAK ... Calibration ...
Format” diskette. If this does not solve the problem and if your diskette does not have a .CAL file on it, contact Kodak.
“Cannot find file.” | Your are trying to update |
| camera back firmware, |
| but the BIN file is |
| missing. |
Reinstall the driver software and try again.
“Cannot find filename.” | You are trying to open an | Try another drive, another |
| archive file that the driver | directory, or another file. |
| cannot locate. |
|
