. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end.
IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back; do not use a substitute cable.
50-pin Connector | 25-pin Connector |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
5.Connect the 50-pin connector to the empty SCSI connector of the device that is terminated internally. Make sure the connector is well seated by pressing it into place firmly, and then pinch the thin wire clamps over its base.
BACK OF
MACINTOSH
COMPUTER
BACK OF ONE OR MORE
SCSI DEVICES
NotTerminated
Terminated Internally
25-pin Connector
50-pin Connector
Preparing for Use with Mac G 4-31
