. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message

Possible Cause

Suggested Solution

 

 

 

“Cannot Take Picture at this time. Check the following.

The camera back is

 

busy.

The camera cannot be

You have tried a command (for example Copy to Folder), and the DCS 465 Camera Back is still performing another operation.

Wait for a short time (for example wait until the red Card Busy light on the camera back stops blinking), and then try again.

electrically tripped.”

Mechanically tripped

Take pictures using your cable

cameras can not be

release.

tripped with the Take

 

Picture button.

 

“Cannot Take Picture at

The PCMCIA card in the

this time. Disk is FULL.”

camera system is full.

If available, replace the current PCMCIA card with another that has space for additional images.

Or make room on the PCMCIA card currently in the camera back by saving images from the card to your computer hard disk with the Move to Folder command (which includes the option of deleting images after they are moved), or by deleting unwanted images from the card with the software Delete button.

Or remove the card and, while connected to the computer with the driver image window opened, shoot single images which may be copied to a folder.

11-30  Reference — KODAK Drivers for TWAIN-Compliant PC Applications G

Page 336
Image 336
Kodak DCS 465 user manual Take pictures using your cable