Paradyne 9550 DS3 installation instructions Using the Asynchronous Terminal Interface, Press

Using the Asynchronous Terminal Interface

The Probe should operate using the default (factory-set) configuration options, with exception to the changes specified in these installation instructions. Refer to the following table for help in navigating through the menus.

Press the . . .	To . . .
Esc key	Go back one screen or menu level. See Menu
	Hierarchy on page 14.
Tab key, or Up (↑), Down (↓),	Move the cursor from one menu item to the next.
Left (←), and Right (→)
Arrow keys
Enter or Return key	Complete the menu or option selection.
Spacebar	Display the next available setting when changing a
	configuration option. All the available settings for an
	option appears at the bottom of the screen.

Follow these steps to go to the Configuration Edit/Display menu so you can start setting up the unit.

Procedure

To load a configuration for editing:

1.From the Main Menu, press the down arrow key twice so the cursor is on Configuration.

2.Press Enter to display the Configuration menu. The Load Configuration From menu appears.

3.Press Enter to select Current Configuration (the cursor is already on this selection). The Configuration Edit/Display menu appears.

This sequence of steps would be shown as the menu selection sequence:

Main Menu → Configuration

13