. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technique 1: Examine a Test Image
1.Set up the DCS 465 Camera Back to operate while connected to a computer.
2.Set the lens aperture to its highest f number, to provide for maximum depth of field.
3.Take a photograph of a plain white object like a clean, white wall.
4.Examine the image on the computer monitor; imperfections in the image, such as dark clusters or streaks, may indicate a dirty imager.
Technique 2: Visually Inspect the Imager
1.If the DCS 465 Camera Back is connected to your computer, discon- nect it now as described earlier in this manual.
2.If the AC battery charger/adapter is connected, disconnect it from the camera back.
3.Lay the DCS 465 Camera Back on its back (the side with the labels and buttons) on a flat, steady surface.
4.Locate the cleaning materials supplied with the DCS 465 Camera Back. Included are an electrostatic discharge (ESD) wrist strap, low-
