Kodak DCS 465 user manual Installing Twain Drivers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Places a set of files within the “DCS4XX” subdirectory.

Overwrites any existing DCS drivers already in the directory. This driver processes images from other KODAK DCS cameras (except for the DCS 100 or 200.)

Installing TWAIN Driver(s)

Follow these steps to install the KODAK Driver(s) for TWAIN-compliant PC applications for use with the DCS 465 Camera Back.

1.Start Microsoft Windows and make sure that you are in the Program Manager.

2.Insert the diskette labeled “KODAK Drivers for TWAIN-compliant Software for use with DCS 465” into your floppy drive.

3.Open the README file for the installation process by following these steps:

A.Choose RUN from the FILE menu.

B.Type A:\README.TXT (type B:\README.TXT if the diskette is in drive B) in the command line.

C.Click OK; the file opens.

D.After reading the file, choose EXIT from the FILE menu; you are returned to the Program Manager.

4.Continue the installation process by following these steps:

A.Choose RUN from the FILE menu.

B.Type A:\SETUP (type B:\SETUP if the diskette is in drive B) in the command line.

C.Click OK.

5-32  Preparing for Use with PC G