Kodak DCS 465 user manual Message Possible Cause Suggested Solution

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message	Possible Cause	Suggested Solution
“DCS Hardware Error”	A problem with the	Verify that all SCSI connections
	hardware has been	are correct (if necessary turn off
	detected.	all equipment to alter the
		connections), make sure the
		camera back has a unique SCSI
		ID, and try again.
“Disk has been recovered	You initiated a disk	No action is required.
successfully.”	recovery by clicking
	Recover Disk in the
	Control Panel. It was
	completed successfully.

“Do you want to delete ALL images in this folder?”

You are about to delete	Make the appropriate choice.
all images in the archive
folder on your PC hard
disk (not only the images
in the image window).

“Do you want to delete ALL images on the camera?”

You are about to delete	Make the appropriate choice.
all images on the
PCMCIA card in the
camera back (not only the
images in the image
window).

“Do you want to delete these image(s)?”

You are about to delete all Make the appropriate choice. selected images. (The

selection may include images not currently appearing in the image window).

 Reference — KODAK Drivers for TWAIN-Compliant PC Applications G 11-33