5 Switch ON the TV. Try out the keys you need for operating it.Try, for example, if the - CH + and digit keys function properly.
• If a key does not work as expected, press and hold that key. Release it immediately as soon as it works. For more information, see chapter 2.3.2.
6 Press the 
device selection key |
| |
twice to finish setup. |
| |
• When no key | 2 x | |
is pressed for | ||
|
5 minutes or 
more, the remote control will exit setup mode, automatically saving all your settings.
Important
If you made a mistake:
•Press the device selection key twice to exit setup.The red Setup light 
turns off.
•Restart from the beginning.
•If the device does not respond at all or not to all of the key commands or if you cannot find the code for your brand, enter ‘9, 9, 9, 9’ in step 3 and continue with step 4.The remote control will now search its full database for a code that works with your TV. Full database search may take up to 15 minutes.
2.3.1 Setting up the remote control for other devices (DVD player/recorder and Cable/Satellite box)
1 Make sure the device is turned on, fully operational and able to respond to remote control commands. E.g. insert a disc in the DVD player / recorder or a video cassette in the VCR.
2 Then follow steps 2 to 6 of ‘Setting up the remote control for your TV’. Make sure to use the correct device selection key: 
or 
.
EN 7
Getting started English
P2003_27__Manual_80_210.indd 7 |