3 Check whether the keys that you need 
for operating your 
TV are working. For 
an overview of the 
keys and their 
functions see chapter 3.1.
•If the TV responds as it should to all of the key commands, the SRP2003 is ready for use.
•If the device does not respond at all or not to all of the key commands, follow the instructions in chapter 2.3.
Getting started English
2.3Setting up the universal remote control
This is only necessary if your device does not respond to the SRP2003. If that is the case, the SRP2003 does not recognize the brand and / or model of your device and you need to set up the remote control to do so.
The example below instructs you how to do this for your TV.You can repeat the same steps for other devices (DVD player/recorder and Cable/ Satellite box) which you want to operate, using the SRP2003.
The remote control can be set up to operate any 3 of the following devices:
| Device name | Description |
|
| TV | Traditional TV, flat screen |
|
|
| TV and projection TV,TV |
|
|
| part of TV / VCR,TV / VCR | |
|
| / DVD and TV / DVD |
|
|
| combos |
|
| DVD | DVD player / recorder |
|
|
| (DVDR), DVD / Hard |
|
|
| Disk Drive combination |
|
|
|
| |
|
| player, High Definition |
|
|
| DVD player |
|
|
| DVD part of TV / DVD,TV | |
|
| / VCR / DVD and VCR / |
|
|
| DVD combos |
|
|
| EN | 5 |
P2003_27__Manual_80_210.indd 5 |