Philips SRP2003/27 user manual Keys and functions

4Press and hold the key that does not

	function and immediately release it when
	the device responds.
•	If the key still does not function as expected,
	try pressing it again for a longer period of
5	time.
	Press the	device

selection key twice
to save your settings
and exit setup
mode.		2 x
•	When no key

is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.

3Using the universal remote control

Using the universal remote control English

3.1Keys and functions

The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices.

Notes

•Keys having the same functions as the keys on your original remote control may have different namings on the SRP2003 (e.g. Info / Display).

•Only functions that are available on your original remote control can be used for operating your devices with the SRP2003.

1 Setup light.

•lights up red when the remote control is in setup mode.

•lights up red when a remote control command is being sent.

2	selects available source
	inputs (antenna, cable,
	etc.).
3	device selection keys.
	Select the device to be
	operated.
		EN	9

P2003_27__Manual_80_210.indd 9 25-09-09 11:0