1Connect a coaxial cable (not supplied) to:
•the COAXIAL jack on this product.
•the COAXIAL/DIGITAL input jack on the device.
Connect to the optical jack
OPTICAL |
OPTICAL
1Connect an optical cable (not supplied) to:
•the OPTICAL jack on this product.
•the OPTICAL/DIGITAL input jack on the device.
Connect an analogue stereo system
AUDIO IN
1Connect the audio cables to:
•the LINE OUT/AUDIO
•the AUDIO input jacks on the device.
Connect a USB device
1Connect a USB device to the 
(USB) jack on the front panel of this product.
Note
•Press 
, and select [Browse USB] in the menu to access the content and play the files.
•Connect a USB device only to the 
jack on the front panel of this product.
•Philips does not guarantee compatibility with all USB devices.
Connect a network
With a wired or wireless connection (see “Get started” > “Set up a network”), you can connect this product to:
•the Internet (for software update/BD Live/Net TV service).
•or a home network (to access media files from a DLNA media server, e.g. PC).
Note
•Internet access to Philips website for software update may not be allowed, depending on the router you use or the Internet Service Provider’s policy. Contact your Internet Service Provider for more information.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to:
•this product.
•the wall socket.
»This product is ready to be set up for use.
4 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Prepare the remote control
1Press and push the battery compartment to slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct polarity
10EN