Philips BDP7500B2, BDP7500S2, BDP7500 MK II user manual Network setup, EasyLink setup

[Speaker Setup]

Optimize the surround output for the connected speaker system.

•[Speaker Setup] - Activate the test tone for the speakers and the subwoofer.

•[Speaker Distance] - Set the delay time for the speakers and the subwoofer if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time.

•[Speaker Volume] - Set the volume level of the speakes and the subwoofer to get the ideal audio balance.

•[Speaker Size]

•Set the speaker size for the speakers and the subwoofer.

•Select [Large] size for speakers that can produce low frequency signal below 120 Hz.

•Select [Off] if there is no speaker connected.

•If the front speakers are set to [Small], subwoofer setting is [On] and it cannot be changed.

•If the subwoofer is set to [Off], the front speakers settings are [Large] and it cannot be changed.

Tip

•The test tone is emitted from the speaker while adjusting the volume level.

•Allow 1ms setting for every 30cm distance between the speaker and the listening position.

Network setup

1Press .

2Select [Setup], and press OK.

3Select [Network Setup], and press .

Video Setup	Network Installation
	View Network Settings
Audio Setup
	View Wireless Settings
Network Setup	Net TV User Location
	Clear Net TV Memory
EasyLink Setup
Preference Setup
Advanced Setup

4Select an option, then press OK.

5Select a setting, then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press .

[Network Installation]

Install the network connection. [View Network Settings]

Display the information for the current network status.

[View Wireless Settings]

Display the information for the current Wi-Fi status. If the current network is not set to a wireless connection, this feature is de-activated.

[Net TV User Location]

Select the location of the Philips server which provides Net TV services.

[Clear Net TV Memory]

Clear the cookies, history, data you input for Net TV which are stored in the cache area of the web browser.

EasyLink setup

1Press .

2Select [Setup], and press OK.

3Select [EasyLink Setup], and press .

Video Setup	EasyLink	On
	One Touch Play	On
Audio Setup
	One Touch Standby	On
Network Setup

EasyLink Setup

Preference Setup

Advanced Setup

4Select an option, and press OK.

5Select a setting, and press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press . [EasyLink]

This product supports Philips Easylink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control all EasyLink-compliant devices that are connected through HDMI connectors.

• [On] - Turn on EasyLink features.

• [Off] - Disable EasyLink features. [One Touch Play]

When you press (standby) to turn on this product, the TV (if the TV supports one-touch play) automatically turns on and switches to the video-in channel. Disc play starts if there is a disc in this product.

• [On] - Turn on one-touch play feature.

• [Off] - Disable one-touch play feature.

English

EN 21