wColor buttons
• BD: Select tasks or options.
xHDMI
• Select the video resolution of HDMI output.
yREPEAT
• Select repeat play or shuffle play.
3 Connect
Make the following connections to use this product.
Basic connections:
•Video
•Audio
•Power
Optional connections:
•Route audio to other devices
•
•
•Digital AV amplifier/receiver
•Analog stereo system
•USB device
•Wired/Wireless network
Note
•Refer to the type plate at the back or bottom of the product for identification and supply ratings.
•Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Connect video/audio cables
Select the best video connection that the TV can support.
•Option 1: Connect to the HDMI jack (for a HDMI, DVI or
•Option 2: Connect to the component video jacks (for a standard TV or Progressive Scan TV).
•Option 3: Connect to the composite video jack (for a standard TV).
Option 1: Connect to the HDMI jack
HDMI IN
1Connect an HDMI cable (not supplied) to:
•the HDMI jack on this product.
•the HDMI input jack on the TV.
Tip
•If the TV has a DVI connector only, connect via an HDMI/ DVI adaptor. Connect an audio cable for sound output.
•If there is a blank screen under HDMI connection, on the remote control press 
and then press “731” (numeric buttons) to recover picture display.
•If this product connects to a TV compatible with 1080p or 1080p/24Hz, Philips recommends HDMI category 2 cable, also known as High Speed HDMI cable, for optimal video and audio output.
•To play the digital video images of a
•This type of connection provides best picture quality.
Option 2: Connect to the component video jack
Y Pb Pr
AUDIO IN
1Connect the component video cables (not supplied) to:
•the Y Pb/Cb Pr/Cr jacks on this product.
•the COMPONENT VIDEO input jacks on the TV.
2Connect the audio cables to:
•the LINE OUT/AUDIO
•the AUDIO input jacks on the TV.
Tip
•The component video input jack on the TV might be labeled as Y Pb Pr or YUV.
8EN