Philips BDP7500S2, BDP7500B2 Use Philips EasyLink, Play a disc, Play from a USB device

6Follow the on-screen instructions to complete the network installation.

»After the network installation completes, you can access the services: browse Net TV, browse PC, BD-Live, software updates.

Tip

•You can check the status of the wired or wireless connection of this product (see “Adjust settings” > “Network Setup” >[View Network Settings] or [View Wireless Settings]).

Use Philips EasyLink

This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.

Note

•To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV. Refer to the TVs/devices manual for details.

One-touch play

1Press (standby) to turn on this product.

»The TV (if the TV supports one-touch play) automatically turns on and switches to the correct video-in channel.

»If a disc is loaded in this product, disc play automatically starts.

One-touch standby

1Press and hold (standby) for more than 3 seconds.

»All the connected devices (if the device supports one-touch standby) automatically switch to standby.

Note

•Philips does not guarantee interoperability with other HDMI CEC devices.

5 Play

Play a disc

Caution

•Do not place any objects other than discs into the disc compartment.

1Press to open the disc compartment.

2Insert a disc with its label facing up.

3Press to close the disc compartment and start disc play.

•To view disc play, turn on the TV to the video input.

•To stop disc play, press .

Note

•Check disc/file formats supported (see “Your product” > “Playable media”).

•If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preference Setup” > [Parental Control] ).

•If you pause or stop a disc, the screen saver appears after 10 minutes of inactivity. To deactivate the screen saver, press any button.

•After you pause or stop a disc and no button is pressed within 30 minutes, this product automatically switches to standby.

Play from a USB device

Play or view media files on the following USB devices:

•flash drive

•memory card reader

•HDD (This product can detect only a portable hard disc drive with USB power peak current no more than 500mA.)

1Connect a USB device to the (USB) jack on the front panel of this product.

2Press , and select [Browse USB], and press

OK.

» A contents menu is displayed.

English

EN 13