Philips DVDR75/021 Sound settings, For receivers/amplifiers with digital multisound decoders

Digital output

Analogue output

Night mode

Sound

All

Stereo

Off

'Vertical video shift'
Use this feature to adjust the position of the picture on your TV left or right using D , C to
suit your TV set.
'SCART video'
	ENGLISH
By default the recorder is set to 'RGB'. Select 'S-Video' if you want to connect an S-VHS
recorder.

Sound settings

Depending on which audio outputs are used, you can select the settings in this menu.

If you only use the analogue audio output ( OUT L AUDIO R ), select the settings 'Off' in the 'Digital output' menu.

'Digital output'

For devices connected to the DIGITAL AUDIO OUT socket, you can select from the following settings.

'All': Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers with digital multisound decoders .

'PCM only: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code

Modulation).
For receivers/amplifiers without digital multisound decoders	.
'Off: Digital output switched off.
For devices with analogue audio input.

'Analogue output'

For devices connected to the analogue audio output ( OUT L AUDIO R ), you can select from the following settings.

'Stereo': For devices without DolbySurround or TruSurround. Use this setting if the DVD recorder is only connected to a stereo TV set.

'Surround: Dolby Digital and MPEG-2 multi-channel are mixed down to a DOLBY surround-compatible two-channel output signal. For devices with Dolby Surround Pro Logic decoder .

'Night mode'

Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours. This only works for Dolby Digital audio on DVD video discs.

User preferences 69