Remote Control NTSC/ANALOG Features

Philips HD6400W manual Remote Control NTSC/ANALOG Features, Analog TV Mode

ANALOG TV MODE

The Remote Control contains three display screens of

“Analog TV” related controls. Use

the touchscreen controls to access

and adjust NTSC features for Input

selection and Menu feature

adjustments.

Note: For battery installation and

alternate audio

	Primarily used for “alt audio” ATSC mode
	feature, this button can also be used to
	quickly select the NTSC Second Audio
	Program (SAP) feature (when available).	status button
	power button	Press to see the current channel number on the DPTV screen.
	power button	Also press to clear the DPTV screen after control adjustments.
	Press to turn the DPTV ON and OFF.
	Press to turn the DPTV ON and OFF.	mute button
		mute button
		Press to turn the sound OFF on the DPTV. Press again to return
		the sound to its previous level.

other details on the initial use of

the remote control also refer to the HD6400W Quick Use guide

included with your DPTV.

BEGIN

1 Gently tap the remote touchscreen with your finger to

display its control panel for use.

		DTV
power		status
alt audio		freeze
sleep		ext input
	analog format
1/3	Analog	DTV

mute

channel

volume

channel scan buttons

Press to scan up (+) or down (-) through any NTSC programmed channel numbers.

volume buttons

Press to adjust the DPTV sound level up (+) and down (-).

ext input button

Press to quickly select NTSC auxiliary input modes (AUX1/2/3), as well as cycle through the DPTV’s other input option modes (Monitor VGA, EXT HD, etc.).

Be sure “DTV” is selected for the

DTV

analog format button

current device tab item category.

2 Press the “Analog” command button (on the lower left of

remote case) to ensure NTSC

mode commands are sent from the

remote.

Analog

Command

Button

sleep button

Press to set the DPTV to

automatically turn itself OFF. 2/3 Analog (15 minutes to 2 hours ahead.)

Press to select one of the TV screen display format modes (i.e. Panoramic, 4:3, 16:9, etc.).

number buttons

Press the number buttons to select DPTV channels. Press two number buttons to select single digit “major” channel numbers. For example: press "0" then "6" for channel 6.

A/CH

DTV

STOP

SMART HELP

Due to the amount of

optional component and

feature uses available with the

remote’s Device Reference and

Learn Code lists, please also refer

to the separate full-use Remote

Control Owner’s Manual for

complete details on its function

and operations.

A/CH button			menu	buttons
A/CH button	menu		Press the Menu (or ok) button to
Press Alternate Channel (A/CH) to select previously			Press the Menu (or ok) button to
Press Alternate Channel (A/CH) to select previously			show on-screen controls. Press M
viewed channels. Enter the desired two channel numbers		ok	▲ or ▼ buttons to move up (or
(from the remote’s number buttons), and then press		ok	down), the M ◀ or ▶ to move
A/CH to toggle back and forth between the two channel			down), the M ◀ or ▶ to move
A/CH to toggle back and forth between the two channel			left (or right) through the list of
selections.			left (or right) through the list of
selections.	exit		controls.
			controls.

	3/3 Analog		DTV

exit button

Press to clear the DPTV screen after control adjustments. Also press to see the current channel number on the DPTV screen.

scroll arrows

Press to move to the next (or previous) page of remote controls. The touchscreen will display the current control screen’s page number, and the total number of pages available for the selected device (1/3; 2/3; etc.)